Wenzhou FengBang Machinery Co., Ltd.


Sourcing & Purchasing

Sourcing & Purchasing


    Semi- automatic assembly machine 
    Machine performance and characteristics: 
    First, the shell stacked on the stack, no stop skin shell. 
    Second, the leather shell vacuum suction belt transport, no scratch. 
    Third, the guideway drawing glue, the coarse group can be adjusted. 
    Four, the whole machine one font type, the occupation area is small 
    Fifth, the inner box leather shell in the same direction a person feeding, save labor. The whole machine should be operated by only 2 people 
    Six, the inner box service takes the box, has the automatic edge-correcting function, the precision is high. 
    Seven, the whole machine has five division service, adjust the data input, simple operation, no reported rate. 
    Eight, the pressure box part up press down pressure side press one time to complete  

    According to the requirements of different products, we have different glue 1, hot glue, hot melt adhesive 2 is cold glue, white glue 

    It can assemble 18-25 boxes in a minute. 

    Semi automatic operation instructions: 
    First of all, in the control system, set the style to draw glue, then put the leather shell at the location point. The box is transported from the conveyor belt to the glue spray location point, and the glue gun draws glue on the leather shell. After the glue is drawn, the inner box is placed on the leather shell and the box comes to the pressure box. The case is glued to the inner box. Finally, the workman arranges the box. 

    Automatic assembly machine operation instructions: 
    Set the pattern of glue on the control system 
    Put the leather shell in the automatic rise position and put the inner box on the side conveyor belt. And start the machine. 
    The leather shell moves from the position of the automatic riser to the position of the spray glue. The glue gun sprays the glue on the shell. After drawing the glue, the conveyor belt carries the shell to the position of the inner box. The manipulator clamps the inner box onto the leather shell,(Available clip or sucker) which is then transported to the box position to glue them together, and finally to the flip plate to integrate the box. 

    The width can be adjusted according to the size of the product. 

    Self rising crust 

    This place is set up with glue graphics. 

    Usually can be set, straight, square,Z, and so on 


    Automatic riser shell 

    prevrecord: QUALITY ASSURANCE